Polyurethane Machinery Corporation (PMC), located at Gusmer Drive, Lakewood NJ, is a subsidiary of the well known multinational corporation PMC Global Inc. PMC is managed by individuals with over 100 years of experience in the polyurethane industry. “Designed with the customer in mind” PMC has target engineered a polyurethane machinery syste
anufactured in the USA which features a basic open construction design, rugged time tested technology, anufactured in the USA which features a basic open construction design, rugged time tested technology, relay logic controls and years of service reliability. PMC concentrates its resources on the major products of a urethane spray system; proportioning units, a uniquely designed heated hose, transfer pumps, spray guns and the ancillary equipment required by a contractor to successfully and economically apply residential foam, roofing, pour foam, Polyurea and Polyurea hybrid coatings. PMC ’s mind set dictates that doing it the right way is the only way! A mind set which separates PMC from the competition.
One/Two Gusmer Drive, Lakewood, NJ 08701 USA Tel: 732-415-4400 Fax: 732-364-4025 Polyurethane Machinery Corporation (PMC) www.polymac-usa.com
Premium Spray Products manufactures spray foam systems for use in homes, office buildings, institutions, and agricultural structures. These two component polyurethane systems consist of an A-side isocyanate and a B-side proprietary polyol blend. Technologically advanced formulations are designed for each specific application type to ensure that building occupants and contents are temperature controlled and shielded against air infiltration, pollen, dust, and noise pollution. Another advantage is that with the foam acting as a vapor barrier, less moisture means less likelihood of mold. Premium is dedicated to qualit y, technology, service, and support. We know that we are only successful if you are. Our goal is to be easy to do business with by being responsive to your needs. All polyurethane chemical systems are not created equal. The chemistry makes a big difference. Our formulations are carefully designed to provide our customers with systems that are superior in their processing and application performance.
1255 Kennestone Circle Marietta, GA 30066 Tel: 770-528-9556 Fax: 770-423-9781 Premium Spray Products, Inc. www.premiumspray.com z
Polyurethane Foam Systems, Inc.
Within the context of an increasingly demanding industry that has experienced much evolvement over the
past few years, the spray foam business sector is faced with major challenges that place its capacity to
meet its customer and contractor growing demands to the test. New technologies offering easy access to
limitless amounts of information and the chance to share work and industry experiences via social
networks, combined with increasingly simple methods of sourcing, comparing and choosing a spray foam
chemical supplier have led to a need for constant positive transformations in our business operations.
Our intention at PFSI is to hold our position at the forefront of these operations. This also represents a
magnificent opportunity for our distinctive Polarfoam™ brand and our Polyurethane Foam Team to not
only maintain our leading position on the polyurethane foam scene but to excel. We strive to be the best
with knowledge and innovation for not only a superb product line, but also in spray foam training, machine
and equipment technologies, coatings and service.
440 Conestogo Rd.
Schmidt & Dirks Designs, Inc. was formed to develop, build and market faster and better ways to handle spray foam trimming and cleanup for residential and commercial foam insulation jobs. We are currently marketing the C I Cutter and the C I Vacuum. The C I Cutter is easily the fastest foam trimmer on the market and uses standard 120 volt power, leaving the trimmings in approximately ¼” by 1” pieces for easy cleanup. Open and Closed Cell models are available.The new C I Vacuum is a portable dependable light weight vacuum designed specifically for vacuuming Th foam insulation trimmings. It operates on standard 120 volt power and is designed to put your foam trimmings directly into standard heavy duty garbage bags for fast easy cleanup. We are a factory direct company owned and operated by 3 partners. Our goal is to give our customers the best support we can and continue to improve and build new products.
1065 Headrick Rd. Potlatch, Idaho 83855 Tel: 208-875-1020 Schmidt & Dirks Designs, Inc. www.schmidtanddirksdesigns.com z
Waterloo, Ontario, Canada
in this issue
Click to subscribe to this magazine
article text for page
< previous story
next story >
Share this page with a friend
Save to “My Stuff”
Subscribe to this magazine