FLORIDA FOAM ROOFING
On the west coast of Florida, Peter
Venhousen first gained experience
with spray foam when his company,
Superior Roofing, first delved into the
spray foam industry with attic insulation
applications. In the years since, Superior
has transitioned from residential insulation
to commercial roofing.
“We’re just getting into the roofing side,”
said Venhousen. “We’ve designed a system
where we can attach solar panels to tar and
gravel with spray foam.”
To make the transition, Superior needed
a high-performance spray rig that would
have no problem tackling substantial
commercial foam roofing projects. What
Venhousen opted for, an SFS ProPAK rig,
delivered on the functionality he needed.
“In the past we’ve put our own rigs
together, but the way it’s set up, it’s so
user-friendly that we won’t go any other
way in the future,” said Venhousen. “By
the time you figure out the cost of buying
everything separately and put a value on
your time, it doesn’t make sense.”
Most recently, Superior utilized its
ProPAK rig to install a 56,000 sq. ft. SPF
roof with a 180k W solar array.
Farther west in Southern California,
Angelus Waterproofing & Restoration
was also in need of a high-performance
spray rig, but for primarily installing spray
polyurea applications. Angelus CEO
Shaun Geiger also turned to SFS, and the
answer was the same: ProPAK.
“Making the investment in an expensive
piece of equipment is something that
requires a lot of research,” Geiger
explained. “SFS was by far the most
helpful in answering my questions, and
figuring out what I needed.”
Angelus has utilized its ProPAK rig on several
sizeable polyurea projects, including the
Westfield Topanga Shopping Center and a
Kaiser Permanente facility, both in Greater Los
CAROLINA RETROFIT AND LIFTING
Back east in South Carolina, William Cantey
was facing a slightly different situation than
either Geiger or Venhousen when he sought
a rig for his company, William Cantey’s Dr.
Energy Saver. Cantey wanted a box truck rig,
and to further complicate the build, the rig
needed to be equally functional at performing
both residential retrofit insulation applications
and concrete lifting applications.
“We had a great experience, they really went
out of their way,” Cantey said about SFS,
which once again delivered the do-it-all
solution–ProPAK–and for Cantey, the rig has
already paid dividends.
“We definitely doubled our market share
from where we were before the rig, just in the
volume we can do and the price point we can
be at,” he said.
From spray polyurea
waterproofing (top) to
SPF lifting and leveling
(bottom), SFS ProPAK rigs
(right) can perform a variety
of applications to address
numerous market needs.